Fixtures the Thickness of Drywall
info@dadolighting.com | v/f 877.323.6584

MirrorLine LED

MirrorLine LED is designed to be mounted behind etched or clear sections of mirrors (see “partners” page for Mirror Silvering Remover). No special framing is required and there is no conflict with plumbing or other systems due to its zero cavity construction.

Available in 1.5 inch (38mm), 2.5inch (64mm) and 3 inch (76mm) wide lens configuration, it may be ordered in any length. Class 2 wiring allows fast easy installation to a remote driver located in adjacent cabinets. New or cut-in housings, for 1/2” or 5/8” drywall, allow for pinpoint placement of the luminaires behind the mirrors, and allows them to be installed further along the construction cycle.

Mirrors, supplied and mounted by others, hung on a Z bar hanger to allow future access to LED panels. Ensure supplied mirrors are water white glass or low iron content to avoid the greenish cast of normal glass.

Product details:
  • All aluminum housing creates a monolithic heat sink. Housing is IC rated.
  • Mounts with screws to studs, joists and hat channel, just like drywall.
  • Housing lip is mudded into surface to provide trimless installations.
  • Under driven Low Wattage White light LEDs, 85 or 90+ CRI options. Produce even distribution with no shadows.
  • DC quick connectors for quick installation and easy replacement.
  • “DeadSide” housing options allow light at edge of mirror at corners or alongside of medicine cabinets.